Hangzhou Chenrui Air Separator Installation Manufacture Co. Ltd

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsPSA Nitrogen Generator

Laser Cutting 99.999% Psa Nitrogen Gas Plant 250 Bar With Big Capacity

Certification
Good quality PSA Nitrogen Generator for sales
Good quality PSA Nitrogen Generator for sales
I'm Online Chat Now

Laser Cutting 99.999% Psa Nitrogen Gas Plant 250 Bar With Big Capacity

China Laser Cutting 99.999% Psa Nitrogen Gas Plant 250 Bar With Big Capacity supplier
Laser Cutting 99.999% Psa Nitrogen Gas Plant 250 Bar With Big Capacity supplier Laser Cutting 99.999% Psa Nitrogen Gas Plant 250 Bar With Big Capacity supplier

Large Image :  Laser Cutting 99.999% Psa Nitrogen Gas Plant 250 Bar With Big Capacity

Product Details:

Place of Origin: hangzhou
Brand Name: chenrui
Certification: ISO9001/ISO1400/18001
Model Number: CBN

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Price: USD 20000-100000/set
Packaging Details: standard export packing
Delivery Time: 50days
Payment Terms: L/C, T/T
Supply Ability: 50 sets per quarter
Contact Now
Detailed Product Description
Product: PSA Nitrogen Generator Capacity: 3-3000nm3/h
Warranty: 1 Year Pressure: 0-8bar/customized
Usage: Nitrogen After-sales Service Provided: Video Technical Support
High Light:

psa nitrogen gas generator

,

psa type nitrogen generator

High Quality Nitrogen Generator , Nitrogen Gas Generator for laser cutting 99.999% 250bar

 

Nitrogen Generator for laser cutting is intended for applications where oxidation is not wanted. For example, an oxide layer can cause paint to adhere less strongly on non-alloy steel. If non-alloy steel is painted after cutting, the cutting gas should be nitrogen. Weldable steel components laser cut with oxygen will not pass the bending test. Stainless steel loses its corrosion resistance when cut with oxygen, and aluminum pieces cut with oxygen have an uneven and burred cut surface.
When nitrogen is used as the cutting gas, the laser beam melts the material, and the nitrogen blows away the molten material from the cutting groove. Since no exothermic reaction takes place, the cutting speed is much slower than when cutting with oxygen. To ensure a burr-free cut edge, the laser beam must usually be focused on the bottom surface of the plate.

 

 

Product Description

Specification output (Nm³/h) Effective gas consumption (Nm³/h) air cleaning system Importers caliber
CBN-5A 5 0.76 KJ-1 DN25 DN15
CBN-10A 10 1.73 KJ-2 DN25 DN15
CBN-20A 20 3.5 KJ-6 DN40 DN15
CBN-30A 30 5.3 KJ-6 DN40 DN25
CBN-40A 40 7 KJ-10 DN50 DN25
CBN-50A 50 8.6 KJ-10 DN50 DN25
CBN-60A 60 10.4 KJ-12 DN50 DN32
CBN-80A 80 13.7 KJ-20 DN65 DN40
CBN-100A 100 17.5 KJ-20 DN65 DN40
CBN-150A 150 26.5 KJ-30 DN80 DN40
CBN-200A 200 35.5 KJ-40 DN100 DN50
CBN-300A 300 52.5 KJ-60 DN125 DN50

 
Applications
-  Food packaging (cheese, salami, coffee, dried fruit, herbs, fresh pasta, ready meals, sandwiches,etc. ..)
-  Bottling wine, oil, water, vinegar
-  Fruit and vegetable storage and packing material
-  Industry
-  Medical
-  Chemistry
 
PSA Nitrogen Generator System is used worldwide.

Food packing, Food storing, Electric & Electronic industry, Petro-gas & Oil field, Chemicals & Petro-chemicals, Coal-mine, Metallurgy, Pharmacy, SMT, Fire-resistance, lab, Air diving, and so on
 

Nitrogen generator for Laser Cutting has been utilized in industry for many years in a variety of applications including higher pressure gas assist cutting, blanketing and beam purge. Nitrogen is often required as a gas assist for cutting to provide cleaner edges, prevent discoloration, improve bend strength and improve paint adhesion. Sunny Young’s tried, tested and proven PSA Nitrogen Generation Technology safely separates the readily available Nitrogen from within the air we breathe.
The two primary uses for Nitrogen generator for Laser Cutting are for Gas Assist Cutting and Laser Beam Purge.
• Gas Assist Cutting: nitrogen is used as a shroud gas to blanket the laser beam when cutting. This removes oxygen from the cutting zone which prevents oxidizing, discoloration or dross.
1. High Pressure Gas Assist cutting requires up to 600 PSI with nitrogen purity ranging from 95% - 99.99% depending on the laser.
.Nitrogen Flow rate can range from 500 – 3000 SCFH depending on the Lasers requirements.
2. Low Pressure Gas Assist cutting requires pressures ranging from 50 – 200 PSI and purities typically range from 95% - 99.99%.
Nitrogen Flow rate can range from 200 – 2000 SCFH depending on the Lasers requirements.
Laser Beam Purge: Nitrogen is used as a beam path purge to remove any particulate from the laser beams path from the nozzle to the cutting zone. This prevents any laser distortion and helps to maintain a more precise cut.
Requires low pressure nitrogen – up to 100 PSI and purities ranging from 95% - 99%
Requires lower nitrogen flow rate and could range from 10 – 100 SCFH depending on the lasers requirements.

 

 Process Flow Brief Description
Laser Cutting 99.999% Psa Nitrogen Gas Plant 250 Bar With Big Capacity
PSA Nitrogen Generation Advantages

1). Low cost: the advanced PSA process is a simple nitrogen production method. Nitrogen is generated within a few minutes after starting up, with low energy consumption. The cost of nitrogen is lower than that of cryogenic air separation nitrogen production.

2). Reliable performance: imported microcomputer control, automatic operation, no special training operators, just press the start switch, can automatically operate, to achieve continuous production of nitrogen.Nitrogen purity is stable and is monitored and displayed by the instrument to ensure the required nitrogen purity.

3). High quality control valve: excellent imported special pneumatic valve can ensure the stable and reliable operation of nitrogen production equipment.Strong technical force and excellent after-sales service.Equipment is containerized, and only gas source, power source and water source need to be connected during field installation.Excellent electrical and mechanical assembly technology, provide continuous technical service, be responsible for site commissioning and training operation.

 

Technical Features

 

1). The equipment has the advantages of low energy consumption, low cost, strong adaptability, fast gas production and easy adjustment of purity.

2). Perfect process design and best use effect;

3). Modular design is designed to save land area.

4). The operation is simple, the performance is stable, the automation level is high, and it can be realized without operation.

5). Reasonable internal components, uniform air distribution, and reduce the high speed impact of airflow;

6). Special carbon molecular sieve protection measures to extend the life of carbon molecular sieve.

7). The key components of famous brands are the effective guarantee of equipment quality.

8). The automatic emptying device of national patent technology guarantees the nitrogen quality of finished products.

9). It has many functions of fault diagnosis, alarm and automatic processing.

10). Optional touch screen display, dew point detection, energy saving control, DCS communication and so on.

Contact Details
Hangzhou Chenrui Air Separator Installation Manufacture Co. Ltd

Contact Person: Sunny

Tel: 0086-15088601709

Send your inquiry directly to us (0 / 3000)