Payment & Shipping Terms:
|Usage:||Oxygen Gas||After-sales Service Provided:||Field Maintenance And Repair Service|
|Capacity:||3-400Nm3/h||Product Name:||PSA Oxygen Generator|
|Type:||Medical Gas Equipments||Outlet Pressure:||0.3-15MPa|
medical oxygen systems,
medical oxygen generating systems
Two Columns Filled Medical Oxygen Generator 150-200 Barg End Pressure
1. Technical parameters
1). Oxygen yield: 3~250Nm3/h
2). Oxygen purity: 90%~95%
3). Oxygen pressure: 0.1~0.6MPa
4). Dew point of oxygen: ≤ -45℃ (Special requirements can be below -60 ℃)
2. Oxygen Generator Specification
|Specification||output (Nm³/h)||Effective gas consumption (Nm³/h)||air cleaning system|
PSA ( Pressure Swing Adsorption) Technology a revolution in Non Cryogenic Air Separation and Oxygen Generation Technology uses special grade of ZMS ( Zeolite Molecular Sieve).
It uses zeolite molecular sieve as sorbent, produces oxygen by making use of the PSA principle.
Under certain pressure, zeolitemolecular sieve has different oxygen/nitrogen adsorption capacity, i.e. much more nitrogen adsorption capacity than oxygen adsorption capacity. PLC controls pneumatic valve open/close to realize two adsorption towers' alternate adsorption and desorption as per pressure change, carries out oxygen/nitrogen separation and produces oxygen with desired purity.
4. The process of oxygen generation plant
Oxygen Generator consist of two columns filled with molecular sieve(CarboTech AC Gmbh). Pre-treated compressed air enters the active column and follows up through the CarboTech. Nitrogen and the other gases are being adsorbed while the oxygen passes through. The active column is pressurized. When pressure is released, column becomes inactive and completely regenerate. In order to secure steady flow two columns are used, one is active while the other is inactive. At the end of cycle they switch roles.
Oxygen from oxygen generator enters oxygen buffer. From there regulated oxygen is fed into the high pressure oxygen compressor where the oxygen is boosted and fed the filling ramp where oxygen cylinders are filled.
Our comapct plant is built on the skid or frame with one central electric socket enabling quick start up. All components are already connected in the factory, so no extensive installation is required.
5.Technical characteristics of Industrial PSA Oxygen Generator
6. Application scope
1). Medical.The generator can be set up to fill the hospital pipeline directly and use the filling ramp as a backup system. Oxygen cylinders can be filled simultaneously or during hours with low consumption.
2). Metallurgy: For anneal protection, agglomeration protection, nitrogenizing, furnace washing and blowing, etc. Used in fields such as metal heating treatment, powder metallurgy, magnetic material, copper process, metallic mesh, galvanized wire, semiconductor, etc.
3). Chemical and new material industries: For chemical material gas, pipeline blowing, gas replacement, gas protection, product transport, etc. Used in fields such as chemical, urethane elastic fiber, rubber, plastic, tyre, polyurethane, biological technology, intermediate, etc.
4). Electronic industry: For encapsulation, agglomeration, anneal, deoxidization, storage of electronic products. Used in fields such as peak welding, circumfluence welding, crystal, piezoelectricity, electronic porcelain, electronic copper tape, battery, electronic alloy material, etc.
Contact Person: Sunny