Product Details:
|
Name: | Ammonia Decomposition Furnace | Heating Method:: | Electric Heating |
---|---|---|---|
Capaicty: | 30 Nm3/hr | Dew Point: | -70 ℃ |
Application: | Protective Gas | Ammonia Decomposistin Furnace: | 10m3/h |
High Light: | AETOK 10m3/h ammonia furnace,AETOK Electric Heating ammonia furnace,AETOK nickel anhydrous ammonia generator |
Industrial Electric Heating Ammonia Cracker Furnace
The gas made in this method is a good protective gas which can be used widely in semiconductor industry, metallurgical industry and other industries and science research which need protective gas.
1. Ammonia is easy to decompose: With not very high pressure, under catalysts, and a temperature controlled at 750~800ºC, the ammonia will nearly completely decompose, with the decomposing rate reaching 99.9%.
2. Easy to refine the gas: As the raw material, the liquid ammonia is of very high purity. The volatile impurities are only little inert gas and water dissolved in the liquid ammonia and there is nearly no oxygen. Meanwhile, under such conditions, the ammonia decomposition is irreversible. So the water can be removed by adsorbing with a dew point of -60 ºC while the gas doing through the 5A molecular sieve. By this way, the nonmetallic elements, for example, chlorine and oxygen which are unpopular in semiconductor industry can be removed.
3. In China, the liquid ammonia as raw material is accessible at a low price and the raw material consumption is also relatively smaller( In theory, each Kg of ammonia can create 2.64 Nm3 mixed gas).
Rated gas output(Nm3/h)
|
5
|
10
|
20
|
30
|
40
|
Rated ammonia consumption (kg/h)
|
2.0
|
4.0
|
8
|
12
|
16
|
Rated heating power of generator (kw)
|
6
|
12
|
29
|
39
|
50
|
Rated heating power of purifier (kw)
|
2
|
4
|
6
|
8
|
10
|
Rated furnace temperature of generator(°C)
|
≤800
|
||||
Recycling heating temperature of purifier(°C)
|
250
|
||||
Rated power voltage (V)
|
380
|
||||
Dew point of gas purified(°C)
|
≤-60
|
||||
Remnant ammonia content of gas purified (PPM)
|
≤10
|
||||
Catalyzer
|
Nickel catalyst
|
Properties and Characteristics
The gas made in this method is a good protective gas which can be used widely in semiconductor industry, metallurgical industry and other industries and science research which need protective gas.
1. Ammonia is easy to decompose: With not very high pressure, under catalysts, and a temperature controlled at 750~800ºC, the ammonia will nearly completely decompose, with the decomposing rate reaching 99.9%.
2. Easy to refine the gas: As the raw material, the liquid ammonia is of very high purity. The volatile impurities are only little inert gas and water dissolved in the liquid ammonia and there is nearly no oxygen. Meanwhile, under such conditions, the ammonia decomposition is irreversible. So the water can be removed by adsorbing with a dew point of -60 ºC while the gas doing through the 5A molecular sieve. By this way, the nonmetallic elements, for example, chlorine and oxygen which are unpopular in semiconductor industry can be removed.
3. In China, the liquid ammonia as raw material is accessible at a low price and the raw material consumption is also relatively smaller( In theory, each Kg of ammonia can create 2.64 Nm3 mixed gas).
1. PLC programmed controller can be added, which can automatically control the conversion of various working states of the equipment.
2. Dew point detector can be added.
3. Gas content testing system can be added.
4. Characteristics
(1) Small investment
(2) Reliable performance and long service life
(3) Heating element
(4) Thermal insulation material
(5) Electrical control
(6) Depressurization system
(7) Purification system
(8) Simple installation
(9) Easy operation and maintenance
(10) High safety
FAQ
1. What if the above technical parameter can't meet my requirements?
The equipment can be customized according to your requirements.
2. How about the payment terms?
Usually, we accept 40% of the total amount paid when placing the order, 55% paid before shipment, and the remaining 5% paid after finishing the installation and debugging at the buyer’s side.
3. How can I believe your quality?
Our equipment are eqquiped with mechanical parts of world renowned brands like Schneider ,Omron and so on and also approved ISO9001 certification.
4. Are you a trade company or a factory ?
We are a manufacturer with a huge factory.Warmly welcome to visit our factory and contact with us.
Contact Person: admin
Tel: +8619951122233