|
Product Details:
|
| Lubrication Style: | Oil Free | Capacity: | 0.7m3/min(25scfm) |
|---|---|---|---|
| Type: | Compressor Head, Screw | Rated Pressure: | 0.7MPa~5.0 Mpa |
| Cooling Method: | Air-cooled | Refrigerant: | R-407C/R-134a |
| High Light: | 5.0mpa compressor air dryers aetok,5.0mpa compressor air dryer aetok,aetok 5.0mpa compressor air dryer |
||
Refrigerated Air Dryer For Air Compressor Screw Compressor
Air Dryer, according to the principle of refrigeration dehumidification, the compressed air is forced through the evaporator heat exchange and cooling and make air oil and water in the compressed air after isobaric cooling, then condense into liquid water and oil with dust, through excluding system automatic drainer to get clean compressed air.
Water cooling type
1. Inlet temperature:≤80℃(≤45℃)
2. Cooling method: Water-cooling
3. Dew point:2-10℃
4. Inlet pressure:0.6-1.0Mpa
5. Pressure drop:≤5% of working pressure
6. Cooling water inlet temperature:≤32℃
7. Cooling water inlet pressure:0.2-0.4Mpa
8. Refrigerant: R22/R134a/R32/R407c
|
Capacity(Nm3/min)
|
2.5
|
|
Rated air inlet pressure
|
0.7MPa
|
|
Inlet/Outlet
|
RC1"
|
|
Rated air inlet temperature
|
45 ℃
|
|
Pressure dew point
|
32 ℃ (2 ℃ - 40 ℃ allowed)
|
|
Pressure loss under full load
|
0.015MPa
|
|
Refrigerant
|
R134a / R410A / R407C
|
> Advanced 3-in-1 compressed air dryer system features modes for pre-refrigeration, evaporation, and air moisture separation
> Remove moisture from your compressed air lines. Prevent too much moisture in compressed air, avoid problems like corrosion of equipment and freezing of outdoor compressor air lines.
> High efficiency pre-refrigeration system, Accommodates compressors up to 21~20000 CFM, 145 PSI max pressure
> Recommended operating pressure: 115PSI.
Main specialties
Contact Person: admin
Tel: +8619951122233
